- ACTIVATING CLOCK
To access the movement , unscrew the clock bezel by rotating it counterclockwise. The movement is assembled to the back of the dial. Remove is dial / bezel assembly and install one "AA" 1.5v battery as indicated by the diagram in the battery holder.
In order to avoid crossthreading when replacing the bezel counter-clockwise until the bezel drops in place. Rotate the bezel clockwise until it fits snugly.
- SET TIME:
Turn set knob in the direction indicated by arrow. If there is no arrow, the set knob can be turned in either direction.
- START CLOCK:
If the clock movement has a "start-Stop" switch, set the switch to "START" to begin timing. If there is no "Start-Stop"switch, your clock contains a self starting quartz movement and should start immediately when the batter is fresh and inserted as directed.
Your clock has carefully adjusted at eh factory and due to the high accuracy of the quartz movement , further regulation should not be necessary.
- BATTERY REPLACEMENT
When your clock begins to lose time, this indicates a weak or exhausted battery. Replace the battery immediately with fresh one to avoid damage to the clock due to battery leakage.
Howard Miller Weather & Maritime clock | BRITANNIA 613-467